USR-PX520: Bộ chuyển đổi tín hiệu EtherCAT sang Modbus

Thông số kỹ thuật

• 02 x EtherCAT (in/Out)
• 01 x Ethernet Standard Port (dùng cho cấu hình)
• 01 x RS485
• Chuyển đổi EtherCAT Slave to Modbus RTU/TCP Master
• Nguồn 9-36VDC

 

Bảng thông số

Catalog	Parameters	Value
Power Supply	Power Input	9-36V DC, 12V/1A is recommended
	Working Current	Idle: 158mA/12V (avg), 163mA/12V (max); Full load: 162mA/12V (avg), 165mA/12V (max)
	Connector	5.08×2P pluggable terminal block with anti-reverse and screw lock
RS485 Interface	Connector	3.81×3P pluggable terminal block with screw lock
	Pin	A (RS485 A), B (RS485 B), G (GND)
	Baud Rate	600~230.4K bps
	Data bits	8
	Stop bit	1, 2
	Parity bit	None, Odd, Even
Ethernet Port	EtherCAT	2× EtherCAT ports (IN/OUT), 10/100Mbps auto-negotiation,integrated switch function
	Ethernet	1× RJ45 port (10/100Mbps, auto MDI/MDIX)
	Default IP	192.168.0.7
	Gateway IP	192.168.0.1
Other Interface	Indicators	PWR, WORK, 485, ECAT
	Reload Button	Press for 3–15s to restore factory settings
	Type-C	Debugging interface for troubleshooting
Physical Parameters	EMC Protection	IEC 61000-4-2(ESD): 6kV contact, 8kV air IEC 61000-4-5(Surge): 2kV common mode, 1kV differential mode for power; 2kV for Ethernet/RS485 IEC 61000-4-4(EFT): 2kV for power, 1kV for Ethernet/RS485
	Isolation	Isolation for both serial, Ethernet, CAN, and power
	Dimension	120×85×30mm (without terminals/rail); 137.3×30×109.3mm (with terminals/rail)
	Installation	DIN rail mounting, aluminum housing
	Operating Temperature	-40°C to +85°C
	Storage Temperature	-40°C to +105°C (non-condensing)
	Operating Humidity	5%–95% (non-condensing)
Software	Protocol	EtherCAT slave to Modbus RTU/TCP master
	EtherCAT protocol	Up to 128 TXPDO and 128 RXPDO groups in EtherCAT, with 128 variables per group
	Modbus protocol	Edge data collection and computation for up to 2,000 data points
	Setup	Setup tool on PC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tài liệu

Datasheet USR-PX520